manualshive.com logo in svg

Electrolux with VS81 timer, Руководство по обслуживанию

Поделиться
Скачать
Electrolux with VS81 timer Скачать руководство пользователя страница 23

 2001.08  eb

23

599 34 85-05

3.4  DESCRIPTIONS OF MAIN FUNCTIONS

3.4.1 

Door lock

The door safety device is powered through the closure of contacts
of the main switch and by the G6.1-H3.2 timer contact.
Few seconds after the starting, the door is locked and the device
contact closes supplying the appliance (contact 5-4).

1. Interference suppressor
2. ON/OFF push-button
3. Pilot lamp
4. Door interlock
7. Door lock lamp (on some models)

3.4.2 

Cold water fill

The cold water fill solenoid (8) is powered in the following way:

§

 

1

st

 level:

-

 

pressure switch 1

st

 level (5) contact closed on “empty”

-

 

closure of timer contact V7.2-G6.2

-

 

drain pump winding (10).

-

 

at step 8 closure of contact V7.4-G6.2 powers.

§

 

2

nd

 level:

-

 

pressure switch 2

°

 level (6) contact closed on “empty”

-

 

closure of timer contact V7.2-N4.4

-

 

drain pump winding (10).

3.4.3 

Hot water fill (some models)

The hot water fill solenoid (9) is powered in the following way:

§

 

pressure switch 1

st

 level (5) contact closed on “empty”

§

 

closure of timer contact V7.4-G6.2

§

 

closure of  “heavy soil” push-button contact (24), if present.

Содержание with VS81 timer






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды