11
ENGLISH
6. CONTROLS
The hood can be switched on pushing directly onto the requested speed
without firstly having to select 0/1 button.
Button Basic function
Indicator lights
Dual Function
L
Press briefly to turn the lighting system on and off.
Button off
Lights off
Press and hold the button for 2 seconds to activate
the lighting system in “courtesy light” mode. The lights
are lit at a reduced power of approximately 5W. This
function can be disabled by pressing the button once
again for 2 seconds or by pressing it briefly to switch
to normal lighting mode.
Button lit
Lights on
Button lit
Courtesy light on
T1
Turns the motor off from whatever speed it is set to.
Button lit
Motor active
Motor inactive
Press and hold the button for 3 seconds with all
the loads turned off (Motor and Lights), to turn the
Activated Charcoal Filter alarm on/off.
Button flashes twice F – Alarm On.
Button flashes once F – Alarm Off.
T2
Turns the motor on at speed one.
Button on
T3
When pressed briefly, turns the motor on at speed
two.
Button on
Speed two on
Press and hold the button for approximately 2” to turn
the Delay function on and off, that is to say to turn
the appliance off after a 20 minute delay. Suitable to
complete elimination of residual odours. Can be acti-
vated from the OFF position and from speeds 1, 2, 3.
Cannot be activated with Intensive speed On.
Buttons flash
-
ing (T1+T2 or
T3 or T4)
Delay functionActive
T4
Turns the motor on at speed three.
Button on
T5
Turns the motor On and Off at Intensive speed for
a timed period of 5 minutes. At the end of the 5
minutes the appliance will automatically return to
the speed that was set before. If the appliance was
turned off at the time of activation, at the end of the 5
minutes the system will return to speed one.
Button on
F
Press and hold for 4 seconds to reset the filter alarm
indicator, shown by flashing of button T1. This proce
-
dure can only be carried out with the motor off.
Button on
Signals the Metal Grease Filter
saturation alarm, indicating that it
is necessary to wash the filters.
The alarm is triggered after the
Hood has been in operation for
100 working hours.
Button
flashing
When this is activated, it signals
the Activated Charcoal Filter
saturation alarm, indicating that
the filter must be changed; the
Metal Grease Filters must also be
washed. The Activated Charcoal
Filter saturation alarm comes
into operation after the Hood has
been working for 200 hours.
Содержание WEGL1030CN
