Electrolux WE 170 P, Руководство пользователя

Страница: 4 / 32

•
Make sure that all health and safety regulations are
obeyed when the appliance is installed in a commercial/
public environment.
•
Do not install the appliance in a moving platform (e.g. on
a ship).
•
Make sure that the floor where you install the appliance
is flat, stable, heat resistant and clean.
•
Make sure that there is air circulation between the
appliance and the floor.
•
The ventilation openings in the base (if applicable) must
not be obstructed by a carpet.
•
Adjust the feet to have the necessary space between
the appliance and the carpet.
•
Do not install the appliance where the appliance door
can not be fully opened.
1.3 Electrical Connection
•
The appliance must be correctly earthed. The
manufacturer is not responsible for the consequences
of an inadequate earthing system.
•
Always use a correctly installed shockproof socket.
•
Make sure that the electrical information on the rating
plate agrees with the power supply. If not, contact an
electrician.
•
Do not use multi-plug adapters and extension cables.
•
Make sure not to cause damage to the mains plug and
to the mains cable.
•
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
•
Connect the mains plug to the mains socket only at the
end of the installation. Make sure that there is access to
the mains plug after the installation.
•
Do not touch the mains cable or the mains plug with
wet hands.
•
Do not pull the mains cable to disconnect the appliance.
Always pull the mains plug.
www.electrolux.com 4