background image

If the temperature and level of the wa-
ter in the drum are too high, the door
lock symbol stays on and you cannot
open the lid . If necessary, do the fol-
lowing procedure to open the lid.
1. Deactivate the appliance.

2. Wait for some minutes.
3. Make sure that there is no water in

the drum.

Important!

 If you deactivate the appliance,

it is necessary to set the programme again.

AT THE END OF PROGRAMME

• The appliance stops automatically.
• The acoustic signals operate.
• In the display   comes on.
• The indicator of the Start/Pause button

4

 goes off.

• You can open the lid 2 minutes after the

appliance stops. The door lock symbol
goes off.

• Press button 

1

 to deactivate the appli-

ance. After five minutes from the end of
the programme, the AUTO OFF function
automatically deactivates the appliance.

When you activate the appliance again,
the display shows the end of the last
set programme. Turn the programme
knob to set a new cycle.

• Remove the laundry from the appliance.

Make sure that the drum is empty.

• Keep the door ajar, to prevent mildew

and odours.

• Close the water tap.

The washing programme is completed,
but the 'Rinse Hold' function is on:

– The drum turns regularly to prevent the

creases in the laundry.

– The door stays locked.
– You must drain the water to open the

door.

To drain the water:
1. If necessary, decrease the spin speed.
2. Press the Start/Pause button 

4

 . The

appliance drains the water and spins.

3. When the programme is completed

and the door lock symbol goes off, you
can open the door

4. Deactivate the appliance.

The appliance drains and spins auto-
matically after approximately 18 hours.

HELPFUL HINTS AND TIPS

The laundry load

• Divide the laundry in: white, coloured,

synthetics, delicates and wool.

• Obey the washing instructions that are on

the laundry care labels.

• Do not wash together white and coloured

items.

• Some coloured items can discolour with

the first wash. We recommend that you
wash them separately for the first times.

• Button up pillowcases, close zippers,

hooks and poppers. Tie up belts.

• Empty the pockets and unfold the items.
• Turn inside out multilayered fabrics, wool

and items with painted illustrations.

• Remove hard stains.
• Wash with a special detergent heavy soil

stains.

• Be careful with the curtains. Remove the

hooks or put the curtains in a washing
bag or pillowcase.

• Do not wash in the appliance :

– Laundry without hems or with cuts
– Underwired bras.
– Use a washing bag to wash small

items.

• A very small load can cause balance

problems with the spin phase. If this oc-
curs, adjust manually the items in the tub
and start the spin phase again.

Stubborn stains

For some stains, water and detergent is not
sufficient.
We recommend that you remove these
stains before you put the items in the appli-
ance.
Special stain removers are available. Use
the special stain remover that is applicable
to the type of stain and fabric.

12 

electrolux

Содержание WAGL 2 T 200

























Отзывы: