Electrolux WA 1668, Руководство пользователя

Страница: 23 / 32

Problem Possible cause Possible solution
Incorrect temperature was set. Make sure that you set the correct tem-
perature.
Too much laundry load. Decrease the laundry load.
The drum is empty and
the display shows
there is some weight in
(
J ).
It is necessary to set a tare.
Press button
1
to deactivate the appli-
ance and to activate it again.
The drum is full but the
display shows 0.0 kg
(
J ).
You loaded the laundry before
to activate the appliance.
Press button
1
to deactivate the appli-
ance. Empty the drum and obey to the
necessary steps. (Refer to 'Loading the
laundry')
After the check, activate the appliance. The
programme continues from the point of in-
terruption.
If the problem occurs again, contact the
service centre.
If the display shows other alarm codes,
contact the service centre.
Service
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
Refer to the information supplied with this
appliance for guarantee condition and point
of contact. The information to give to the
service is on the rating plate.
We recommend that you write the information
here:
Model
(MOD.) ..................
Product number
(PNC) ..................
Serial number
(S.N.) ..................
INSTALLATION
Unpacking
1. Use the gloves. Remove the external
film. If necessary, use a cutter.
2. Remove the cardboard top.
3. Remove the polystyrene packaging
materials.
4. Remove the internal film.
23