Electrolux VOLTA Campus U4710, Инструкция по эксплуатации, Страница: 7 / 12

1. Pull the dust bag upwards and remove the
motor protection filter.
2. Rinse the filter under tap water and
dry it completely.
3. Put the filter back into the cleaner and
close the cover
REPLACEMENT OF THE EXHAUST FILTER
1. Open the filter grille positioned at the
rear of the cleaner.
2.
Remove the exhaust filter from the rear
housing, inspect the condition of the filter.
If heavily soiled replace the filter.
CLEANING THE MOTOR FILTER
It is recommended that the motor filter should be
cleaned approximately every three months or when
required with the cleaner used more frequently.
4. Fit the grille into the rear housing ensuring
the locating tabs are located in position and
push the grille for the latch to lock.
➚
➚
3.
Place the exhaust filter into the rear housing.
➚
➚
5.
MAINTENANCE
To purchase new filters contact
Electrolux on 1300 365 305 (Aus), 0508 730 730 (Nz).
35124_U4710_Campus_IFU_V4.indd 7 6/10/08 5:17:11 PM