Electrolux Ultrapower EUP84DB, Инструкция

Страница: 2 / 86

3 www.electrolux.com 2 www.electrolux.com
13
11
5 6 7 8
15 16
17
9 10
12
1 3 4 2
14
For models EUP82xxx
UA
GB
FR
AR
BG
GR
NO
CZ
HR
PL
DA
HU
PT
DE
IT
RO
EE
LT
RU
ES
LV
SK
SR
FI
NL
SL
SV
TR
4 www.electrolux.com
Electrolux reserves the right to change products, information and
specifications without notice.
ENGLISH
Thank you for choosing an Electrolux Ultrapower® vacuum cleaner.
In order to ensure the best results, always use original Electrolux
accessories and spare parts. They have been designed especially for
your vacuum cleaner. This product is designed with the environment
in mind. All plastic parts are marked for recycling purposes.
DESCRIPTION OF ULTRAPOWER®
A. ON/OFF button
B. Power regulation button
C. Locking screw
D. Charging station, wall unit (*
E. Charging station, floor unit (*
F. Charging adapter
G. Fine filter (inner filter)
H. Pre filter (outer filter)
I. Release button, dust container
J. Dust container
(* Not available on models
EUP82xxx
K. Cable protector grill
L. Hatch cover for brush roll
M. Brush roll
N. BRUSHROLLCLEAN® pedal
O. Nozzle front lights
P. Charging indicator
Q. Cliff hanger
R. Wall holder *)
S. Charging connector*)
*) Only on models EUP82xx.
BEFORE STARTING
Check that the package includes all parts described in this instruction
manual and read this manual carefully. Pay special attention to the
safety precautions chapter. Save these instructions.
1
Assemble the handle.
For model EUP82xx, use the wall holder *):
2
A) Make sure that Ultrapower® is on a stable and horizontal surface
away from heat sources, direct sunlight or wet places. Attach the wall
holder to the wall 104 cm above the floor with a suitable screw and wall
plug. Make sure to use a correct wall plug for the wall.
B) Attach the handle to the wall holder.
C) Connect the charging cable to the back side of the vacuum cleaner.
For all other models:
3
Assemble the charging stand.
4
A) Connect the charging cable to the charge stand.
B) There is a hollow space in the bottom of the charging station where
unused cable can be wound.
C) Position the charging station on a stable and horizontal surface away
from heat sources, direct sunlight or wet places.
5
Insert the adaptor into the mains and charge Ultrapower®. The charging
indicator will be lit when Ultrapower® is on charge.
CHARGING ULTRAPOWER®
6
When fully charged, the charging indicator will blink slowly. The num-
bers of LED lamps will indicate the level of charge. Full charging time is
around 5 hours. For better battery performance, charge Ultrapower® for
24 hours before first use and always keep it on charge when not used.
VACUUMING WITH ULTRAPOWER®
Before vacuuming, check that the nozzle wheels and the brush roll are
clean from sharp objects in order to avoid scratching sensitive floors
and to ensure full cleaning performance.
7
Start and stop Ultrapower® by pushing the ON/OFF button. Ultrapow-
er® has 3 power settings which is regulated with the power regulation
button.
Ultrapower® will start on the “High power mode”.
For more silent cleaning and longest run time, press the power regula-
tion button to activate the “Long runtime mode”.
Press the power regulation button one more time to activate the “Nor-
mal cleaning mode”.
BRUSHROLLCLEAN® FUNCTION
Use the BRUSHROLLCLEAN® function to keep the brush roll clean and
free from hair and fibres. For best results use the BRUSHROLLCLEAN®
function when Ultrapower® is fully charged.
8
Place Ultrapower® on a hard and flat surface. Do not use the BRUSH-
ROLLCLEAN® function on carpets.
Press the BRUSHROLLCLEAN® pedal with your foot while the cleaner is
on. Hold for 5 seconds until hairs and fibres are removed. There will be
a cutting noise during this process, this is normal. If hairs remain on the
brush roll, repeat the process.
The BRUSHROLLCLEAN® function is equipped with an overheating
protection. If the BRUSHROLLCLEAN® function has been used for more
than 30 seconds (constant or interrupted) it will deactivate the brush
roll and turn off the nozzle front lights. The vacuum cleaner can still be
used, even when the BRUSHROLLCLEAN® function is deactivated. To re-
activate the BRUSHROLLCLEAN® function, place Ultrapower® on charge
and charge for 15 minutes.
Please note that the BRUSHROLLCLEAN® function might not be able to
remove thicker threads or wires that are caught in the brush roll.
EMPTYING OF THE DUST CONTAINER
9
Remove the dust container by pressing the button.
10
Take out the filters from the dust container by pressing the release but-
tons. Empty the contents into a dustbin. Never wash the dust container
or filters in a dishwasher.
IMPORTANT - FILTER CLEANING!
11
The filters must be cleaned at regular intervals to ensure a high clean-
ing performance. Take out the filters by pressing the release buttons.
Separate the inner filter from the outer filter.
12
Rinse the filter parts carefully under lukewarm water without using any
detergents. (Never use the dishwasher or washing machine.) Shake to
remove excess water and leave to dry minimum 12h before putting
them back into the cleaner.
CLEANING THE HOSE AND NOZZLE WHEELS
13
Loosen the hose behind the nozzle from its upper connection. Remove
any object or debris that can be blocking the airflow in the hose or in
the air channel to the dust cup, and put the hose back.
14
If the wheels need to be cleaned or get jammed, remove them carefully
by using a flat screwdriver.
REMOVING AND CLEANING THE BRUSH ROLL
15
If the brushroll gets blocked Ultrapower® will stop. Open the cable
protector grill and the brush roll hatch cover and remove the brush roll.
16
Use a pair of scissors to remove threads etc. Reassemble the brush roll,
making sure it can spin freely.
REMOVING THE BATTERIES FOR RECYCLING
Warning; Battery removal must only be done by an Electrolux
service center or official collection point!
17
Only remove batteries if the product is to be scrapped. Improper
handling of the batteries may be hazardous. Batteries should always
be completely discharged before removal. Take your product to an
Electrolux service center or official collection point for recycling. They
can remove and recycle the battery and electric parts in a safe and pro-
fessional way. Follow your country’s rules for collection of rechargeable
batteries and electrical products.
Enjoy a great cleaning experience with Ultrapower®!