Electrolux UltimateTaste 500, Инструкция

Страница: 10 / 24

10 www.electrolux.com
CNT
TH
EN
17 HOW TO USE THE MEAT GRINDER*
• Insert the grinder screw (B) into the grinder housing (A).
a. GROUND MEAT: Place the grinder knife (C) over the square shaft at the end of the grinder screw
(B). Place the desired grinder plate (D) over the knife (C).
b. SAUSAGE: Assemble top and bottom sausage attachment (G) and place them over the square
shaft at the end of the grinder screw (B).
c. MEATBALL: Assemble top and bottom kubbe attachment (F) and place them over the square shaft
at the end of the grinder screw (B).
Tighten the grinder ring (E) by hand until the meat grinder is secured.
WARNING! Do not over tighten the ring.
• Push the attachment hub release button (2) to the right and remove the attachment hub cover (13).
Fit the assembled meat grinder in the front attachment hub (3) using the attachment hub release
button (2).
The attachment hub release button (2) will click into position once the meat grinder is securely
attached.
WARNING! Before putting attachments turn off the appliance and unplug it.
• Place a mixing bowl (7) or other container under the attachment to collect the result.
• Place the grinder tray (H) over the grinder housing (A).
• Dice raw meat into small pieces (around 2.5cm) or sausage/meatball mixture and place it on the
food tray.
Plug in the appliance and turn the speed selector to recommended speed.
• Feed the meat into the feed chute by using the pusher (I).
WARNING! Do not put your f ingers or other utensils in the feed chute.
Notes: Suggest to run the machine for another 1 min after the last meat was put, to have less remaining
ground meat in the machine.
18 HOW TO USE THE SALAD MAKER*
• Choose your slicer/shredder (K) and insert it into the salad maker housing (J) by turning it clockwise.
Make sure the attachment is fully inserted.
WARNING! The blades and inserts are very sharp!
• Push the attachment hub release button (2) to the right and remove the attachment hub cover.
Fit the assembled salad maker in the front attachment hub (3) using the attachment hub release
button (2).
The attachment hub release button (2) will click into position once the salad maker is securely
attached.
• Place a mixing bowl (7) or other container under the attachment to collect the result.
• Cut the food into a size that f its the feed chute. Plug in the appliance and turn the speed selector to
desired speed.
• Feed the food into the feed chute by using the pusher (L).
WARNING! Do not put your fingers or other utensils in the feed chute.
19 When f inished using your attachment, turn of f the appliance and unplug it. Place back the front
attachment hub cover (13) using the attachment hub release button (2).
CLEANING AND CARE
Always unplug the appliance before cleaning
1 Motor Housing. Never immerse the housing with motor in water! Clean the motor housing only with a
damp cloth. Do not use abrasive cleaners, scouring pads or abrasive detergents while cleaning the
appliance.
2 Mixing Bowl, Mixing Tools ( dough hook, whisk, beater), and splash guard are dishwasher safe. If
washing by hand, don’t use wire brush, steel wool or bleach to avoid rust.
3 Meat grinder* and salad maker* attachments should only be washed by hand in warm soapy water.
*Available in certain models only. Also Available for sale on brand website.