Problem
Possible cause
Remedy
There is no
drum light
Defective drum lamp.
Contact the service centre to re‐
place the drum lamp.
Unexpected
duration time
appears on the
display.
The drying duration is calculated
according to load size and
dampness.
This is automated - the appli‐
ance is working correctly.
A programme
is inactive.
The water container is full.
Drain the water container, push
the
Start/Pause button. 2)
The drying cy‐
cle is too short.
The load size is small.
Select a time programme. The
time value must be related to the
load. To dry one item or a small
amount of laundry we recom‐
mend short drying times.
The laundry is too dry.
Select an appropriate time pro‐
gramme or a higher dryness lev‐
el (e.g.
extra dry (Extratrock‐
en)
)
Drying cycle
too long 5)
The filter is clogged.
Clean the filter.
The load is too large.
Do not exceed the maximum
load size.
The laundry was not spun suffi‐
ciently.
Spin the laundry well in the
washing machine.
Too low or too high room tem‐
perature - this is not the appli‐
ance malfunction.
Ensure a room temperature
higher than +5°C and lower than
+35°C. Optimal room tempera‐
ture to achieve best drying re‐
sults is between 18°-25°C.
The display
shows:
.
All buttons are inactive, except
the
Start/Pause.
The appliance downloads the
APP updates. Wait until the up‐
date process is complete. If you
deactivate the appliance during
update, it resumes when you ac‐
tivate the appliance again.
No wireless
connection or
connection of‐
ten brakes off.
The wireless home network does
not work.
Check wireless home network
configuration. Restart the router.
If problem still exists contact
your wireless service provider.
The smart device or the appli‐
ance or both are not paired with
the wireless network.
Repeat connection configuration
steps on smart device or the ap‐
pliance or both.
ENGLISH
27
