• Do not use fabric softener to wash and
then dry. In the tumble dryer laundry
becomes soft automatically.
• Use the condensate as distilled water,
e.g. for steam ironing. If it is necessary
clean the condensate before (e.g. with
a coffee filter) to remove possible small
pieces of fluff.
• Always keep the airflow slots on the
bottom of the appliance clear.
• Make sure that is good airflow in the
appliance installation position.
10.2
Adjustment of the
remaining laundry moisture
degree
To change the default degree of the
remaining moisture of the laundry:
1.
Turn on the appliance.
2.
Wait approximately 8 seconds.
3.
Select 1 of available programmes.
4.
Push at the same time and hold down
the
Dry Plus ()
and
Spun
at RPM (U/Min.)
buttons.
One of the symbols goes into the view on
the display:
- the maximum dry laundry
- the more dry laundry
- the standard dry laundry
5.
Push the
Start/Pause
button again
and again until you set necessary
degree.
6.
To memorise the setting, push at the
same time the
Dry Plus ()
and
Spun at RPM (U/Min.)
buttons
for approximately 2 seconds.
10.3
Deactivating the Water
container (Behälter) indicator
1.
Turn on the appliance.
2.
Wait approximately 8 seconds.
3.
Select 1 of available programmes.
4.
Push at the same time and hold down
the
Dry Plus ()
and
Buzzer
(Signal)
buttons.
One of 2 configurations is possible:
• the Water container (Behälter)
indicator:
is on and the symbol
goes into the view - the
water container indicator is
permanently
on
• the Water container (Behälter)
indicator:
is off and the symbol
goes into the view - the
water container indicator is
permanently
off
11.
CARE AND CLEANING
11.1
Cleaning the filter
At the end of each cycle the symbol
Filter (Sieb)
is on the display and you must
clean the filter.
The filter collects the fluff. The
fluff occurs while the cloths
are dried in the tumble dryer.
1.
Open the door. Pull the filter.
www.electrolux.com
18