Electrolux TW SL EP, Руководство пользователя

Страница: 45 / 48

• To keep vibration and noise at the mini-
mum, when the tumble dryer operates, it
must be put on a stable and flat surface.
• When the appliance is put in its perma-
nent position, check if is fully level with
the aid of a spirit level. If it is not, adjust
the feet until it is.
• Do not remove the feet. Do not decrease
the floor clearance through thick carpets,
bar of wood or equivalent. This can in-
crease the heat which can cause interfer-
ence with the operation of the appliance.
Important!
• The temperature of the hot air which oc-
curs in the tumble dryer can increase to
60 °C. The appliance must not be instal-
led on the floor which is not resistant to
high temperatures.
• When the tumble dryer operates, the
room temperature must not be lower
than +5 °C and higher than +35 °C. This
can cause unwanted effect on the per-
formance of the appliance.
• If it is necessary to move the appliance, it
must be moved vertically.
• The appliance must not be installed be-
hind a lockable door, a sliding door, a
door with a hinge on the opposite side to
that of the appliance in such a way that a
full opening of the tumble dryer is restric-
ted.
UNPACKING
Caution!
Before use all parts of the transport pack-
aging must be removed.
To remove the polystyrene blockages:
1. Open the load door.
2. Pull plastic hose with the polystyrene
blockages out from the drum.
It is possible to adjust the height of the tum-
ble dryer. To do that adjust the feet (see
picture).
15mm
INSTALLATION UNDER A COUNTER
The appliance can be installed as free-
standing or below the kitchen counter with
correct space (see picture).
> 850 mm
600 mm
600 mm
THE LOAD DOOR REVERSAL
The load door can be installed by the user
in the opposite side. It can help to easily put
electrolux 45