Electrolux TT 893, Руководство пользователя

Страница: 10 / 20

6.3 Filling the rinse aid dispenser
M AX
1
2
3
4
+ -
A B
D
C
1. Press the release button ( D ) to open
the lid ( C ).
2. Fill the rinse aid dispenser ( A ), no
more than the mark 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the re-
lease button locks into position.
You can turn the selector of the
released quantity (
B ) between po-
sition 1 (lowest quantity) and posi-
tion 4 (highest quantity).
7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to ’Set-
ting and starting a programme’.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
• If you use the combi detergent tab-
lets, activate the Multitab option.
5. Set and start the correct programme
for the type of load and the degree of
soil.
7.1 Using the detergent
20
30
M AX
1
2
3
4
+
-
A B
C
1.
Press the release button ( B ) to open
the lid ( C ).
2. Put the detergent in the compartment
(
A ) .
3. If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4. If you use detergent tablets, put the
tablet in the compartment (
A ).
5. Close the lid. Make sure that the re-
lease button locks into position.
10 www.electrolux.com