Electrolux TG 10010, Руководство пользователя

Страница: 12 / 23

electrolux 29
GB
The materials used on this appliance
marked with the sympol
are
recyclable.
Maintenance
Defrosting
Bleeding part of the moisture of cooling
chamber in form of frost and ice goes
with the operation of the appliance.
Thick frost and ice has an insulating
effect, so it reduces cooling efficiency as
the temperature increases, it needs more
energy, at a certain thickness it does not
allow the door of the freezing
compartment to open, possibly the door
can be broken.
It is possible to scrape off and remove
smaller frost and ice with the enclosed
ice scraper.
The tray in figure is not a piece of
accessories to the appliance!
When ice coating is so thick that it can
not be removed with the frost scraper
defrosting is necessary. Its frequency
depends on usage.
How to defrost it:
Break the circuit of the appliance.
Take the frozen foods out of the
appliance and put them into a basket
lined with paper or cloth. Store them in a
possibly cool place or replace them into
a frozen or fresh food compartment of a
refrigerator.
Leave the door open.
Sweep off the melting water occasionally
with a cloth or sponge in direction of
sides which gathers in the outlet channel
practically formed in the bottom of the
appliance and can be removed as
follows:
Put an tray high enough in front of the
appliance. Pull out defrost water outlet
placed in the middle of the bottom of the
appliance carefully in the direction of the
arrow. Defrost water will flow into the tray
through the outlet.
Defrosting process can be made quicker
by placing a pot or dish filled with warm
water to the cooling plate formed as a
shelf.
After defrosting wipe the surfaces and
push defrost water outlet back.
Apply voltage to the appliance.
After the red light has gone out put the
foods back.
Regular cleaning
It is practical to clean the inside of the
freezer and defrost it at a time.
Household cleaner or soap must not be
used.
After breaking the circuit wash the
appliance using lukewarm water and
wipe it.
Clean the door gasket with clean water.
After cleaning apply voltage to the
appliance.
It is recommended to remove the dust
and dirt collected on the back of the
appliance and the condenser once or
twice a year.