Electrolux SPEEDELIGHT, Оригинальное руководство пользователя

Страница: 11 / 38

11
• During maintenance, the cable and plug must be kept in a visible
position by the operator carrying out the work.
• Do not touch the appliance with wet hands or feet or when barefoot.
• Do not remove the safety guards.
• Respect the requirements for the various ordinary and extraordinary
maintenance operations. Non-compliance with the instructions can
create risks for personnel.
• Maintenance, checking and overhaul operations must only be carried
out by a specialised technician or the After-Sales Service, provided
with suitable personal protection equipment (safety shoes and gloves),
tools and ancillary means. Refer to “B.9
Personal protection
equipment
“ for suitable personal protection equipment.
A A..9 9 O Orrd diin na arryy m ma aiin ntte en na an ncce e
• Do not clean the machine with jets of water.
• Put the machine in safe conditions before starting any maintenance
operation.
• All scrapping operations must occur with the machine stopped and cold
and the electrical power supply disconnected.
• Contact with chemical substances (e. g. detergent, rinse aid, scale
remover, etc.) without taking appropriate safety precautions (e. g.
personal protection equipment) can involve exposure to chemical risk
and possible damage to health. Therefore always refer to the safety
cards and labels on the products used.
A A..1 10 0 S Se errvviicce e
PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO AVOID
POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY
• Do not operate or allow the appliance to be operated with the lid open.
• Make the following safety checks on all appliances to be serviced
before activating the magnetron or other microwave source, and make
repairs as necessary: (1) interlock operation, (2) proper lid closing, (3)
seal and sealing surfaces (arcing, wear, and other damage), (4)
damage to or loosening of hinges and latches, (5) evidence of dropping
or abuse.
• Only original spare parts can ensure the safety standards of the
appliance.
• Before turning on microwave power for any service test or inspection
within the microwave generating compartments, check the magnetron,
wave guide or transmission line, and cavity for proper alignment,
integrity, and connection.