Electrolux SG16410, Руководство пользователя

Страница: 9 / 16

Problem Possible cause Solution
The buzzer sounds. The
Alarm icon flashing. The temperature in the freezer is
too high. Refer to "High Temperature
Alarm".
is displayed in the tem-
perature display
An error has occurred in measur-
ing the temperature. Call your service representative
(the cooling system will continue to
keep food products cold, but tem-
perature adjustment will not be
possible).
The compressor operates
continually. The Temperature regulator may
be set incorrectly. Set a warmer temperature.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
frequently. Do not keep the door open longer
than necessary.
The food temperature is too high. Let the food temperature decrease
to room temperature before stor-
age.
The room temperature is too
high. Decrease the room temperature.
There is too much frost
and ice. Food are not wrapped properly. Wrap the food better.
The door is not closed correctly. Refer to "Closing the door".
The door gasket is deformed or
dirty. Refer to "Closing the door".
The temperature in the
appliance is too low. The Temperature regulator may
be set incorrectly. Set a higher temperature.
The temperature in the
appliance is too high. The Temperature regulator may
be set incorrectly. Set a lower temperature.
The door is not closed correctly. Refer to "Closing the door".
The food temperature is too high. Let the food temperature decrease
to room temperature before stor-
age.
The temperature in the
freezer is too high. Food is too near to each other. Store food so that there is cold air
circulation.
Large quantities of food to be fro-
zen were put in at the same time. Insert smaller quantities of food to
be frozen at the same time.
The appliance does not
operate. The appliance is switched off. Switch on the appliance.
The mains plug is not connected
to the mains socket correctly. Connect the mains plug to the
mains socket correctly.
The appliance has no power.
There is no voltage in the mains
socket. Connect another electrical appli-
ance to the mains socket. Check
fuse. Contact a qualified electri-
cian.
The door has been open to long. Close the door.
As much as the advice does not lead to result, call the nearest brand-mark service.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "In-
stallation".
electrolux 9