Electrolux SANTO 2902i, Инструкция по эксплуатации

Страница: 20 / 25

AEG-Refrigeration 292 5209
86
VH34-AUK 06.94
Santo 2941i longfresh E-Nr.: 621 370 121 (R12)
Santo 2902i longfresh E-Nr.: 621 371 022 (R134A)
10. Fault coding
The following fault codes are blinking in the LCD-display:
Code LCD Meaning possible cause of fault
SA KT longfresh air sensor defective sensor short circuit, sensor
disconnection/interruption
sb KT longfresh evaporator sensor sensor short circuit, sensor
defective disconnection/interruption
sc KT refrigerator air sensor defective sensor short circuit, sensor
disconnection/interruption
sd KT refrigerator evaporator sensor sensor short circuit, sensor
defective disconnection/interruption
SF GT freezer air sensor defective sensor short circuit, sensor
disconnection/interruption
FO KT EEPROM read error EEPROM not or incorrectly connected
F1 KT U-evaporator not cooled in sensors crossed, longfresh fan not
pre-set time period running, cooling system in longfresh
compartment blocked
F2 KT air in longfresh compartment sensors crossed, longfresh fan
not cooled in pre-set time not running, magnetic valve not
period switched
F3 KT U-evaporator too warm sensors crossed, appliance was not
compared to longfresh sufficiently warm prior to test
air temperature
F4 KT U-evaporator too warm sensors crossed, appliance was not
compared to refrigerator sufficiently warm prior to test, magnetic
air temperature valve not switched
F5 KT U-evaporator too warm sensors crossed, appliance was not
compared to refrigeration sufficiently warm prior to test,
evaporator temp. magnetic valve not switched
F6 KT longfresh-air temperature too sensors crossed, appliance was not
warm compared to refrigerator sufficiently warm prior to test,
air temperature magnetic valve not switched