Electrolux RWP 107109 W, Руководство пользователя

Страница: 8 / 32

Warning! Do not remove the drain
hose from the rear support.
Remove this hose only if it is
necessary to drain the water. Refer
to "Frost precaution" and "What to
do if".
• Plug the smaller upper hole and the two
large ones with the corresponding plastic
plug caps.
Positioning and levelling
Level the appliance by raising or lowering
the feet.
The appliance
MUST be level and stable on
a flat hard floor. If necessary, check the set-
ting with a spirit level. Any necessary ad-
justment can be made with a spanner.
x 4
Accurate levelling prevents vibration, noise
and displacement of the appliance during
operation.
Repeat the levelling action, if the appliance
is not level and stable.
Warning! This appliance is free
standing only. Do not remove the
worktop for any reason.
Water inlet
An inlet hose is supplied and can been
found inside the machine drum. Do not use
the hose from your previous machine to
connect to the water supply.
Important! This appliance must be con-
nected to a cold water supply.
1. Open the porthole and extract the inlet
hose.
8 electrolux