Electrolux Quiet Clean, Руководство пользователя

Страница: 8 / 14

5
REPLACING THE MOTOR FILTER
Should be done with every 10th emptying of the dust container or every 10th
replacement of the dust bag.
1 Open the lid.
2 Remove the old filter (28).
3 Insert a new filter and close the lid.
REPLACEMENT OF THE MICRO FILTER AND THE NONWASHABLE HEPA
FILTER*
The filter must always be replaced with new ones and cannot be washed. Should be
done with every 10th emptying of the dust container or every 10th replacement of the
dustbag.
1 Open and remove the lid (28. ; 29.).
2 Remove the filter and replace it with a new one as shown in the picture (30.; 32.).
Important: snap on the lower part of the filter frame first then after the upper one.
Make sure the sealing is in place.
CLEANING THE WASHABLE HEPA FILTER*
1 Open and remove the lid, then remove the filter
(28. ; 29.).
2 Rinse the inside (dirty side) of the filter in warm tap water. (31.) Tap the filter
frame to remove excess water. Repeat four times and allow the filter to dry.
Note: Do not use cleaning agents and avoid touching the delicate filter surface.
3 Replace the filter and lid as shown (30. ; 32.).
Important: snap on the lower part of the filter frame first then after the upper
one. Make sure the sealing is in place.
RECOMMENDED FILTERS:
Motor Filter: Menalux EF1
Micro Filter: Menalux EF17
HEPA filter non-washable: Menalux EFH12
27*
28*
29*
32
30*
31*
* Depending on the model