Electrolux PROline EFE503, Инструкции по эксплуатации и монтажу

Страница: 14 / 18

14
SOMETHING NOT WORKING
If the appliance is not working correctly, please carry out the following checks, before contacting your local
Comet Service Centre.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by
incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Symptoms Solutions
The hob hotplate does not heat up Check:
-
that the unit is connected and the electrical
supply is switched on
- the mains fuse has not blown
-
the correct control knob has been turned.
The hotplate is not giving satisfactory results Check:
- the hotplate is clean and dry
- the pan is the correct size for the hotplate
- the pan has a flat bottom
-
the setting is correct for the type of cooking.
The oven does not come on Check:
- check if a cooking function/temperature has
been selected correctly
-
the switch from the mains supply to the cooker is
ON.
It takes too long to finish the dishes, or they
are cooked too fast Check:
- the temperature may need adjusting
Steam and condensation settle on the food
and the oven cavity - refer to the contents of this booklet, especially to
the chapter “Using the Oven”.
-
Leave dishes inside the oven no longer than 15-
20 minutes after the cooking is completed.
If after these checks, the appliance still does not operate correctly, contact your local Comet Service
Centre. When you contact the Service Centre, they will need the following information:
1 Your name, address and postcode.
2 Your telephone number
3 Clear and concise details of the fault
4 The model and serial number (see rating plate)
5 Date of purchase
COMET AFTER SALES SERVICE
We are sure that this product will provide many years of trouble free service to you, however, should you
experience any faults with this appliance please contact your local Comet Service Centre for advice.
Our number can be found in your local telephone directory.