- 14 -
Spares Operation 07.02 C.D.
599 50 07-52/2
-
before programe start, it indicates the estimated programe time.
The estimated programe time can be corrected automatically.
The times of prewash, mainwash,rinse and spinning will be added and corrected.
-
indicates estimated duration of programe / remaining duration in minutes. The duration in
minutes can be corrected because of the sensorlogic Fuzzy - Logic and UKS.
-
indicates the end of programe
-
After the program and the options are chosen you start the machine with the start button.
After that moment you can only change the spinspeed.
-
Break: Programe stops in any position.
Þ
During the breaktime the change of the programe isn't possible.
-
If you turn the selection switch during the program you must restart the machine.
3.10 The electronic program cycle display
PRE WASH
MAINWASH
RINSEHOLD
SPIN
END
OVER DOSING
RINSE
-
indicates the selected program steps
-
indicates the actual steps during the program
-
indicates the end of program
-
indicates at the end of program "Overdosage", that means to much detergent is used.
Its active in the programes Boiled/Colored and Easy care.
-
indicates fault codes
-
In the customer service program it also indicates waterlevels
Displayed with LED's or backround illumination
RINSE+
3.8
Duration display
3.9
Start - Break button