Dishwasher
04.99
HV 83-N
H:\H1\GSP\TECHNIK\AEGHB\137201GB.P65
Easytronic Dishwashers with Flow Heater - Fully Integrated, Integrated, Built Under, Freestanding
292 1372 17
Installation of the Drain Hose
Drain hose connection:
Max. permissible height: 1 metre;
Min. height required 30 cm above floor level.
The drain hose can be extended horizontally to a maximum length of 3 metres, at a height of
85 cm.
Regeneration
The water chamber for regeneration (3) contains 350 ml water. During regeneration, the
regeneration valve (11) is energized. The 350 ml water runs into the salt container (9) and mixes
with the salt to form a brine solution.
In the top of the salt container there is an opening with a small filter, from here the brine solution
passes through a non-return valve (10) and enters the softener (8) where the resins are
regenerated.
The softener has 10 settings and can be adjusted to suit the degree of water hardness.
Stufe
Wasserhärte
Restwasserhärte
Salz
Bedarfsabhängiges
water hardness
residual water hardness
Salt
Regenerieren nach
°d
°F
°d
°F
Demand Dependent
Regeneration after
0
< 4
< 7
1
4 - 10
7 - 18
1 - 5
2 - 9
95 g
130 l
2
11 - 14
19 - 25
2 - 5
4 - 9
95 g
97 l
3
15 - 18
26 - 33
3 - 5
5 - 9
95 g
70 l
4
19 - 22
34 - 40
3 - 5
5 - 9
95 g
60 l
5
23 - 26
41 - 47
3 - 6
5 - 11
95 g
47 l
6
27 - 30
48 - 54
4 - 6
7 - 11
95 g
40 l
7
31 - 34
55 - 61
3 - 7
5 - 11
95 g
35 l
8
35 - 40
62 - 72
4 - 7
7 - 13
95 g
30 l
9
41 - 50
73 - 90
-7
-13
95 g
25 l
The adjustment of the water hardness is described in the short list of service functions.
Technical Data
