PROBLEM SOLVING
NOTE: Turn OFF the power switch and unplug the electrical cord before servicing.
PROBLEM
CAUSE
SOLUTION
Motor won’t start
Electric plug
Power switch not
turned “ON”
Full dust cup
Hose
Canister lid not
latched
Full dust cup
Slip ring open
Hose
Internal safety
thermostat trips
Cord connection at
hose
Assembly or
related
attachments
Push plug securely into
outlet.
Try another outlet.
Check circuit breaker.
Make sure power switch is
“ON.”
Empty dust cup.
Remove any clogs from
hose that restrict airflow,
then try again.
Push canister lid until it
latches firmly.
Empty dust cup.
Rotate slip ring on wand
until hole is covered.
Remove any clogs from
hose that restrict airflow,
then try again.
Unplug cleaner and check
for obstructions in hose,
wands and attachments.
Check for full dust cup.
Clean/replace motor filter.
Check powerhead and hose
plugs for proper connection.
Call Electrolux at 08706
055055.
Know the Model number and
Serial number when you call.
No suction at end of
hose
Reduced suction
Cleaner shuts off
General questions
3
3
3
3
3
3
3
3
3
3
10
3