Electrolux MFF3015, Инструкция по использованию и уходу

Страница: 14 / 36

14
SETTING OVEN CONTROLS
Setting the clock
When the appliance is first powered up or when the power
supply to the appliance has been interrupted, the display
will flash “12:00”. Always set the clock for the correct time
of day before using the appliance.
To set the clock:
1. Press clock once (do not hold keypad down).
2. Within 5 seconds, press and hold or until
the correct time of day appears in the display.
The clock cannot be changed during an active self-clean
cycle. Also, the clock cannot be changed with features
that have a bake time or (delayed) start time active.
NOTE
Changing between the temperature display
modes (°F or °C)
The electronic oven control is set to display in Fahrenheit
(°F) from the factory. The oven may be programmed for
any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to display °C (Celsius)
or from °C to °F (control should not be set for Bake
or Self-clean when setting this feature):
1. Press broil . “— —” appears in the display.
2. Press and hold until “ HI ” appears in the display.
3. Press and
hold broil
until F or C appears in the
display.
4. Press or to switch between the display
modes (°F to °C or °C to °F).
5. Press any control keypad to return to normal operating
mode.
Setting a silent or audible control
When touching the oven control keypads, a beep will
sound each time a keypad is pressed. If desired, the
control may be programmed for silent operation. This will
block the control from sounding whenever a keypad is
pressed.
To toggle between the silent control or control with
sounds settings:
1. Press and hold start for 6 to 7 seconds until a tone
sounds.
2. Press or to toggle between “ SP ” for
speaker ON or “ — — “ for speaker OFF (silent control)
settings.
3. Press start . The current time of day will return to the
display.
Setting 12 or 24 hour display modes
The clock display mode allows you to choose between 12
or 24 hr mode. The factory pre-set clock display mode is
12 hr. See the examples below to change the clock display
modes.
To set the control to display 24-hour clock display
mode:
1. Press and hold clock for 6 seconds.
2. Press or until 24Hr appears in the display
and release the keypad. The clock is now set for
24-hour display mode.
To change from 24-hour display mode to 12-hour
mode:
1. Press and hold clock for 6 seconds.
2. Press or until 12Hr appears in the display
and release the keypad. The clock is now set for
12-hour display mode.