#
Check the LED light code configuration.
During normal operating conditions the LED’s work in this sequence:
LED 1 (Yellow) is
ON
LED 5 (Red) is
ON
LED 6 (Green) is
OFF
During “E5” fault the LED’s work in this sequence:
LED 1 (Yellow) is
FLASHING
at 5 Hz
LED 5 (Red) is
OFF
LED 6 (Green) is
ON
.
Note:
If all the above checks relating to the sensors & wiring have been completed, yet the E5 fault still
exists, this would indicate the outdoor main PCB has failed & would need to be replaced.
Page 19 KSSSI90
