electrolux 37
Electrical connection
Before plugging in, ensure that the
voltage and frequency shown on the
serial number plate correspond to your
domestic power supply. Voltage can
vary by ±6% of the rated voltage.
For operation with different voltages, a
suitably sized auto-transformer must
be used.
The a
appliance m
must b
be e
earthed.
The power supply cable plug is provided
with a contact for this purpose.
If the domestic power supply socket is
not earthed, connect the appliance to
a separate earth in compliance with
current regulations, consulting a
specialist technician.
The M
Manufacturer d
declines a
all
responsibility iif tthe a
above ssafety
precautions a
are n
not o
observed.
This appliance complies with
the following E.E.C. Directives:
• 87/308 E
EEC of 2/6/87 relative to
radio interference suppression.
• 73/23 E
EEC of 19.2.73 (Low Voltage
Directive) and subsequent
modifications;
• 89/336 E
EEC of 3.5.89
(Electromagnetic Compatibility
Directive) and subsequent
modifications.
ATTENTION!
It must be possible to disconnect the
appliance from the mains power
supply; the plug must therefore be
easily accessible after installation.
Building-in
See “Installation Instructions” supplied.
Please check whether, after installing
your appliance and especially after
reversing the door, the door seal seals
right round. A badly fitting door seal
may lead to heavy frosting and thereby
to a higher power con-sumption.
Warning!
If the ambient temperature is
cold (i.e. in Winter), the gasket may not
fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket
or accelerate this process by heating
up the part involved with a normal
hairdrier.
Dimensioned d
drawing
