Electrolux ICON Professional E48DF76EPS Скачать руководство пользователя страница 79

Страница: 79 / 112

SECTION D -TROUBLEINGSHOOTING

NOTE: Always check the wiring and pin/plug connectors before replacing any component.

Index

Electrical components will not operate.

Flame too large and yellow on top burner.

Flame too small on top burner.

Flame goes out, when valve is turned to the low position.

Top burners, not burning properly.

One top burner, not burning properly.

Top burner valve difficult to turn.

Igniters do not spark when the burner knob is turned to the lite position.

Igniters spark but burner does not ignite.

Igniters continue to spark after burner is ignited.

Oven does not operate in any fuction.

Oven temperature off more than 10°.

Oven does not operate in bake.

Oven does not operate in broil.

Oven does not heat in convection bake and convection fan does not run.

Oven heats in convection bake but convection fan does not operate.

Oven does not heat in convection bake but the convection fan runs.

Oven does not heat in convection roast and convection fan does not run.

Oven does not heat in convection roast but convection fan runs.

Oven heats in convection roast but convection fan does not operate.

LEDs do not light.

One LED does not light.

Cooling fan does not operate.

Oven does not operate in self-cleaning.

One oven light does not light.

Both oven lights do not light.

Содержание ICON Professional E48DF76EPS

















































































































Результаты поиска

Содержание ICON Professional E48DF76EPS

Отзывы:

Бренды по названию

Популярные бренды

Electrolux ICON Professional E48DF76EPS, Руководство по обслуживанию

Результаты поиска

Содержание ICON Professional E48DF76EPS

Отзывы:

Бренды по названию

Популярные бренды