Electrolux HDC03890, Руководство по обслуживанию

Страница: 7 / 20

SOI 02.10 FV 7/20 599 72 74-12
3 - CONTROLS
FUNCTIONS CONTROLLED BY THE
BUTTON (1)
Cooking time indicator.
End of cooking time indicator.
Timer indicator.
Fig. 4
Clock indicator.
1 -
SELECT FUNCTIONS BUTTON
2 -
DECREASE BUTTON “ ”
3 -
INCREASE BUTTON “ ”
4 -
DISPLAY
5 -
COOKING TIME INDICATOR
6 -
END OF COOKING TIME INDICATOR
7 -
TIMER INDICATOR
8 -
CURRENT TIME INDICATOR
In this programmer the time of day, the cooking times, the end of cooking times and the timer are all shown
on the display.
The various functions are set using a button that scrolls through the functions in sequence to select the one
required.
The selected function is indicated by lighting the LED corresponding to the symbol for that function.
If none of the functions are selected (all the function indicator LEDs are off) the oven will operate in manual
mode, because in this case the programmer's internal relay contacts remain closed.
N.B.: The lettering and symbols may vary according to the styling and brand. This figure shows an example,
for more specific reference please see the instruction manual for your model.
4 - OPERATION
This type of S.E.T. (Simple Electronic Timer) programmer fitted to an oven or hob allows various cooking
functions to be used.
If the programmer is suitably set, the appliance can be turned on and off based on various criteria, as
described in the chapter entitled "Use of the programmer".
This programmer's main functions are as follows:
- Indicates the time by means of a digital display.
- Indicates cooking functions on a display.
- Semiautomatic timed cooking function by setting a cooking time.
- Semiautomatic timed cooking function by setting an end of cooking time.
- Automatic cooking function combining an end of cooking time and a cooking time.
- Timer function.
- Display switch-off function (*).
- Start pyrolysis function (**)
(*)
N.B. : Some more recent versions of this programmer do not have the display switch-off
function (see pages 9 and 10).
(**) NOTE1 : This function is only available on certain versions with low voltage relay and power
board (see pages 9 and 10).