Information for test institutes
For all the necessary information for test performance. send an email to:
Write down the product number (PNC) that is on the rating plate.
5.
OPTIONS
Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indica-
tors are on before the programme
starts.
5.1
Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The related indicators are off.
The programme duration can increase.
1.
Press the on/off button to activate the
appliance.
2.
Make sure that the appliance is in set-
ting mode, refer to ‘Setting and start-
ing a programme'.
3.
Press and hold function buttons (
D
)
and (
E
) at the same time until the mul-
titab indicator comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1.
Set the water softener to the highest
level.
2.
Make sure that the salt container and
the rinse aid dispenser are full.
3.
Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4.
Adjust the water softener to the water
hardness in your area.
5.
Adjust the released quantity of rinse
aid.
5.2
Acoustic signals
The acoustic signals operate in these
conditions:
• The programme is completed.
• The level of the water softener is adjus-
ted electronically.
• The appliance has a malfunction.
Factory setting: On.
It is possible to deactivate the
acoustic signals.
Deactivating the acoustic signals
1.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to ‘Set-
ting and starting a programme’.
2.
Press and hold function buttons (
B
)
and (
C
) at the same time until the indi-
cators of function buttons (
A
), (
B
) and
(
C
) start to flash.
3.
Press function button (
C
),
• The indicators of function buttons
(
A
) and (
B
) go off.
• The indicator of function button (
C
)
continues to flash.
• The display shows the current set-
ting of the acoustic signals.
On
Off
4.
Press function button (
C
) to change
the setting.
5.
Deactivate the appliance to confirm
the setting.
54 www.electrolux.com
Содержание GA55LV220
Страница 63: ...ENGLISH 63 ...
Страница 64: ...www electrolux com shop 117923491 A 462012 ...
