Electrolux FLEXIO II Z 930 Скачать руководство пользователя страница 4

4  

Connecting vacuum cleaner

Fitting or removing the flexible hose 

to the air inlet

•  Fit the flexible hose into the air inlet.  

 

Turn the hose grip clockwise until it  

 

clicks into position.

•  To release, first remove the plug from  

 

the power socket. Detach the flexible  

 

hose firmly from the air intake duct  

 

by turning anti-clockwise.

Fitting or removing the flexible hose 

to the air outlet

•  Remove the filter cover and the fliter.
•  Fit the flexible hose into the air outlet.  

 

Turn the hose grip clockwise until it  

 

clicks into position.

•  To release, first remove the plug from  

 

the power socket. Detach the flexible  

 

hose firmly from the air outlet duct  

 

by turning anti-clockwise.

Fitting the extension tubes and  

 

accessories

 

this appliance are kept free from   

 

blockages and do not insert any   

 

objects into these orifices/vents. 

•  Do not use without dust bag and   

 

filters in place.

•  If the motor overheats, it will turn off  

 

automatically. If this occurs, press  

 

the on off button and wait for a few  

 

minutes before switching on again.

•  Extra care should be taken when   

 

vacuuming staircases. 

•  It is dangerous to alter the 

 

specifications or modify the vacuum

 

cleaner, only use accessories 

 

recommended by Electrolux. 

 

•  Under no circumstances should the 

 

customer attempt to repair the    

 

vacuum cleaner. 

•  The vacuum cleaner should only be 

 

repaired and/or serviced by an 

 

authorized Electrolux service centre 

 

and only genuine Electrolux spare  

 

parts should be used. Failure to do  

 

so may render the warranty void.

This vacuum cleaner is for household 

use only. 

Important ! 

This vacuum cleaner must only be 

connected to a power supply whose 

voltage and frequency comply with 

the specifications given on the 

appliance rating plate.

Quick Guide

When taking the product out of its 

packaging, check for damages.

VACuuM CLEANEr ASSEMBLING

 

Always remove the plug from the 

power supply before fitting or removing 

accessories. Before putting the 

appliance into the service, please check 

if all filters are inserted correctly.

A

A

B

B

Содержание FLEXIO II Z 930













Отзывы: