Electrolux FAVORIT 88421 I, Руководство пользователя

Страница: 24 / 68

The wash results are not satisfactory
There are streaks, milky spots or a bluish coating
on glasses and dishes
• Decrease rinse aid dosing.
Water drops have dried onto glasses and dishes • Increase rinse aid dosing.
• The detergent may be the cause. Contact the
detergent manufacturer’s consumer care line.
If after all these checks, the problem persists, contact your local Service Force Centre.
Technical data
Dimension Width - height - depth (cm) 44,6 x 81,8-89,8 x 57,5
Electrical connection - Voltage
- Overall power - Fuse
Information on the electrical connection is given on the rating
plate on the inner edge of the dishwasher's door
Water supply pressure Minimum - Maximum (MPa) 0,05 - 0,8
Capacity Place settings 9
Hints for test institutes
Testing in accordance with
EN 60704
must be carried out with appliance fully loaded and
using the test programme (see "Washing programmes").
Test in accordance with
EN 50242
must be carried out when the salt container and rinse
aid dispenser have been filled with salt and rinse aid respectively and using the test pro -
gramme (see "Washing programmes").
Full load: 9 standard place settings
Amount of detergent required: 5 g + 20 g (Type B)
Rinse aid setting: position 4 (Type III)
Arrangement upper basket
24 Technical data
Downloaded from DishWasher-Manual.com Manuals