Electrical connection
Safety standards require the
appliance to be earthed. Prior to
using the appliance for the first
time, ensure that the rated voltage
and type of supply on the rating
plate match that of the supply
where the appliance is to be
installed. The electrical rating data
is also on the rating plate.
Always plug the mains plug into a
correctly installed approved socket.
Multi-way plugs, connectors and
extension cables must not be used.
This could constitute a fire hazard
through overheating.
If necessary, have the domestic
wiring system socket replaced. If
the electrical supply cord has to be
replaced, contact your local
Customer Care centre.
The plug must be accessible after
the appliance has been installed.
Never unplug the appliance by
pulling on the cable. Always pull
the plug.
The manufacturer accepts no
liability for failure to observe the
above safety precautions.
Our appliances are supplied with a
security device to protect against
the return of dirty water back into
the machine.
If the spigot of your sink has a "no
return valve" incorporated this can
prevent the correct draining of your
dishwasher. We therefore advise
you to remove it.
34
electrolux
installation
Likewise the internal diameter of the
couplings used for connections to the
waste outlet must be no smaller than
the diameter of the hose provided.
When connecting the drain hose to an
under sink trap spigot,
the entire
plastic membrane must be
removed.
Failure to remove all the
membrane will result in food particles
building up over time eventually
blocking the dishwasher drain hose
spigot.
117995110 26012007.qxp 1/27/2007 9:27 AM Page 34