Technical Support - DMM
10/106
599 77 23-65 Rev. 03
3.2.2
Control panel configuration
The washing programmes, the functions of the selector knob and the various buttons vary
according to the model, since these are determined by the configuration of the appliance.
3.2.2.1
Programme selector (S1)
The selector used is of the HI-FI type (the dial has no index and
no reset position, the programme selected is indicated by the fact
that the corresponding LED lights up). The number of positions
cannot be configured. There are always 16 (in all three stylings)
and they are bound to the number of LEDs that indicate the
washing programmes.
The programmes can be configured to perform different washing
cycles (e.g.: water level, drum movement, no. of rinses and the
washing temperature to be selected according to the type of
garments).
The selector can be turned both clockwise and anti-clockwise.
For each programme, the compatible options and other
parameters are defined.
3.2.2.2
Programme configuration
The table below lists the parameters that can be used to define the washing programmes.
Types of fabric
Cottons/linen, Synthetics, Delicates, Wool, Hand-wash, Shoes,
Jeans, Duvet, Silk.
Special programmes
Soak, Miniprogramme, Easy-Iron, Conditioner, Rinses,
Delicate rinses, Drain, Delicate spin, Spin.
Temperature
Normal, Maximum: the initial temperature is the one set for the
washing programme selected.
Spin
Normal, Minimum, Maximum.
Options (Normal/Possible)
Rinse Hold, Pre-wash, Stains, Extra Rinse, Normal, Daily,
Super quick, Spin reduction, No spin.
Programme phases
Pre-wash, Wash, Rinses, Spin, Delayed start.
