Electrolux EWX 12540 W, Руководство пользователя, Страница: 31 / 44

Malfunction Possible cause Solution
The door will not open:
●
The programme is still
running.
●
The door lock has not been
released.
●
There is water in the drum.
●
Wait the end of washing
cycle.
●
Wait for some minutes until
the door lock is released.
●
Select drain or spin
programme to empty out
the water.
No water is visible in the
drum
●
Machines based on modern
technology operate very
economically using very little
water without affecting
performance.
There is water on the floor:
●
Too much detergent or
unsuitable detergent
(creates too much foam)
has been used.
●
Check whether there are any
leaks from one of the inlet
hose fittings. It is not always
easy to see this as the water
runs down the hose; check
to see if it is damp.
●
The drain hose is damaged.
●
The drain filter has not fully
screwed in after cleaning.
●
Reduce the detergent
quantity or use another one.
●
Check the water inlet hose
connection.
●
Replace it with a new one.
●
Screw fully in the drain filter.
The machine does not fill:
●
The water tap is closed.
E10
●
The inlet hose is squashed or
kinked.
E10
●
The filter in the inlet hose is
blocked.
E10
●
The door is not properly
closed.
E40
●
Open the water tap.
●
Check the inlet hose
connection.
●
Clean the water inlet hose
filter.
●
Close firmly the door.
what to do if... electrolux 31
Unsatisfactory washing
results:
●
Too little detergent or
unsuitable detergent has
been used.
●
Stubborn stains have not
been treated prior to
washing.
●
The correct temperature
was not selected.
●
Excessive laundry load.
●
Increase the detergent
quantity or use another one.
●
Use commercial products to
treat the stubborn stains.
●
Check if you have selected
the correct temperature.
●
Introduce into the drum less
laundry.
132966410_GB.qxd 10/01/2008 9.34 Pagina 31
Downloaded From WashingMachine-Manual.com Manuals