Electrolux EWW 147410 W, Руководство пользователя

Страница: 25 / 32

Problem Possible cause/Solution
The machine does not dry
or does not dry properly: The drying time or the dryness degree has not been selected.
• Select the drying time or the dryness degree.
The water tap is not turned on.
• Open the water tap.
The drain filter is clogged.
• Clean the drain filter.
The machine is overloaded.
• Reduce the laundry load in the drum.
The selected drying programme, time or dryness degree was not
suitable for the laundry.
• Select the suitable drying programme, time or dryness degree
for the laundry.
The laundry is full of differ-
ent colored fluff:
The fabrics washed in the previous cycle released fluff of a differ-
ent color (refer to “Fluff in the garments” in chapter “Use - Washing
& Drying”).
• The drying phase helps to eliminate some fluff.
• Clean the clothes with a fluff remover.
In case of an excessive amount of fluff in the drum repeat the fol-
lowing procedure twice:
• Thoroughly clean the empty drum, the gasket and the door with
a wet rag.
• Perform a rinse cycle.
• Put a wool or piled fabric rag inside the drum.
• Perform a drying cycle of 10 minutes.
• Remove the old wool cloth.
Now you can wash other garments.
If you are unable to identify or solve the
problem, contact our service centre. Before
telephoning, make a note of the model, se-
rial number and purchase date of your ma-
chine: the Service Centre will require this
information.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
M
o
d
.
..
.
..
. .
..
P
ro
d
. N
o
. .
..
...
..
S
er
. N
o
. .
..
..
. .
..
TECHNICAL DATA
Dimensions Width
Height
Depth 60 cm
85 cm
63 cm
Electrical connection
Voltage - Overall power - Fuse Information on the electrical connection is given on the rating
plate, on the inner edge of the appliance door.
electrolux 25