Electrolux EWT806, Руководство пользователя

Страница: 28 / 33

Problem Possible causes What to do
Clothes still dirty after
wash program. Not enough or no detergent. Check detergent use and rewash clothes.
Too many clothes in load. Remove some clothes and rewash.
Incorrect Fabric, Dirt or water Temp.
selected. Reselect settings.
Incorrect water level selected. Use Auto water level or a higher manual water level and
rewash clothes.
Clothes still wet or
sudsy after wash
program Poor rinsing and spin due to excessive
suds In future use less detergent & ONLY use a low sudsing,
front load washer detergent in this machine, such as Cold
Power for Front Loaders and High Effciency Top Loaders or
detergent labelled “Matic”.
Scraping noise on spin. Bra wire or other thin item caught
between inner and outer washbowls. If item is visible, remove with pliers.
Use wash bag in future.
Humming, clicking
and other intermittent
noises. Bowl rotation at start of wash. Normal noise.
Lid will not open Machine is at a spin stage and
‘SAFETY Lid is locked’ is on screen. If you want to access the bowl, wait until stage is complete
and ‘SAFETY Lid is locked’ disappears. Then you can open
the lid.
At end of wash. Machine is nishing final
spin & the lid lock release stage. Wait a short while until ‘SAFETY Lid is locked’ disappears
from screen.
Lid may be stuck in the locked position. If ‘SAFETY Lid is locked’ is not on screen, press Power to
turn off machine, then press Power again. If lid still will not
open you should call Service.
28 troubleshooting
electrolux water aid washing machine
Troubleshooting
Model: EWT959