Electrolux EWT 1367 VDW, Руководство пользователя

Страница: 13 / 24

ration and the indicators of the pro-
gramme phases
2. If necessary, change the temperature,
the spin speed, the cycle duration, or
add available options. When you acti-
vate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message Err.
8.5 Starting a programme
without delay start
Press :
• The indicator stops to flash and
stays on.
• The indicator
starts to flash on the
display.
• The programme starts, the door is
locked and the display shows the indi-
cator
.
• The drain pump can operate for a short
time when the appliance fills water.
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts automati-
cally the programme duration
agree with the laundry load.
• The display shows the new val-
ue.
8.6 Starting a programme with
delay start
• Press
again and again until the dis-
play shows the delay you want to set.
The related indicator comes on the dis-
play.
• Press :
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you press
.
To cancel the delay start:
1. Press to set the appliance to
pause.
2.
Press until the display shows ’.
Press again to start the pro-
gramme immediately.
8.7 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1. Press . The indicator flashes.
2. Change the options.
3. Press again. The programme con-
tinues.
8.8 Cancelling a programme
1.
Press the button for some sec-
onds to cancel the programme and to
deactivate the appliance.
2.
Press the same button again to acti-
vate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the
water.
8.9 Opening the lid
While a programme or the delay start op-
erates, the appliance lid is locked and the
display shows the indicator
.
CAUTION!
If the temperature and level of the
water in the drum are too high,
you cannot open the lid.
Open the appliance lid when the delay
start operates:
1. Press to pause the appliance.
2.
Wait until the lid lock indicator
goes off.
3. You can open the lid.
4. Close the lid and press the again.
The delay start continues to operate.
Open the appliance lid when the
programme operates:
1.
Press the button for some sec-
onds to deactivate the appliance.
2. Wait for some minutes and then open
carefully the appliance lid.
3. Close the lid and set the programme
again.
ENGLISH 13