ENGLISH
49
Drying only
Warning! Do not exceed the maximum laundry
loads:
- 2.5 kg for linen and cottons
- 2
.0
kg for synthetics.
The water tap must be open and the drain hose must
be positioned in the sink or connected to the drain
pipe.
1. Load the laundry
2. Depress the ON/OFF button
to switch the
machine on.
3. Select the drying programme
(for cotton or
synthetics).
4. Depress the DRYING TIME
button until the
time you want appears in the display (for timed
drying).
If you wish to carry out the electronic drying,
depress button
until the pilot light
corresponding to the degree of dryness required
illuminates.
5. Press the START/PAUSE button
to start the
programme.
6. At the end of the cycle, turn the programme
selector dial to CANCELLING
O
and press the
ON/OFF button again to switch the appliance off.
7. Remove the laundry.
Automatic washing and drying
(NON-STOP programme)
Warning! For NON-STOP programmes, it is also
essential not to exceed the maximum load sizes of
2.5 kg for cotton and 2 kg for synthetics.
If you use a dosing device in a washer-dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
1. Load the laundry.
2. Add detergent and additive.
3. Switch the machine on by depressing the
ON/OFF button
.
4. Select the wash programme.
5. Select eventually the required options by means
of the relevant buttons. If possible, do not select a
spin speed lower than that proposed by the
appliance to avoid a too long drying time so
saving energy.
In any case the reduction of the spin speed is
only possible after selecting drying. The lowest
values you can select are the following:
- 900 r.p.m. for cottons & synthetics with
electronic drying
- 900 r.p.m. for cottons and 700 r.p.m. for
synthetics with timed drying
6. Select the drying time or degree of drying.
7. Start the programme by depressing the
START/PAUSE button.
8. At the end of the programme, turn the selector
dial to CANCELLING
O
and press the ON/OFF
button again to switch the machine off.
9. Remove the laundry.
