Electrolux EWH 147313 W, Руководство пользователя

Страница: 23 / 28

essary, check the setting with a spirit level.
Any necessary adjustment can be made
with a spanner. Accurate levelling prevents
vibration, noise and displacement of the
machine during operation.
Caution! Never place cardboard,
wood or similar materials under the
machine to compensate for any
unevenness in the floor.
WATER INLET
The inlet hoses are supplied with the appli-
ance and can be found inside the machine
drum.
Do not use the hoses from your previ-
ous machine to connect to the water
supply.
1. Connect the hoses with the angled
connection to the machine. The hot
water hose is provided with a red nut
and must be linked on the right side.
(See the illustrated instructions supplied
with the label hanged on the back of
the appliance).
Caution!
Do not place the inlet hoses down-
wards. Angle the hoses to the left
or right depending on the position
of your water taps.
2. Set the hoses correctly by loosening
the ring nut. After positioning the inlet
hoses, be sure to tighten the ring nut
again to prevent water leaks.
3. Connect the hose for hot water to a hot
water tap with 3/4 thread. Connect the
cold water hose to a cold water tap
with 3/4 thread.
If there is no tap for hot water, connect
only the cold water hose: the water will
be heated in the tub.
Always use the hoses supplied with the
appliance.
The inlet hose must not be lengthened. If it
is too short and you do not wish to move
the tap, you will have to purchase a new,
longer hose specially designed for this type
of use.
45°
35°
electrolux 23