Electrolux EWG 14750 W, Руководство пользователя

Страница: 18 / 32

6. Remove any objects from the pump im-
peller by rotating it.
7. Put the cap back on the emergency
emptying hose and place the latter
back in its seat.
8. Screw the pump fully in.
Warning!
When the appliance is in use and depend-
ing on the programme selected there can
be hot water in the pump. Never remove
the pump cover during a wash cycle, al-
ways wait until the appliance has finished
the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened so
as to stop leaks and young children being
able to remove it.
Cleaning the water inlet filters
If you notice that the machine is taking lon-
ger to fill, check that the filter in the water
inlet hose is not blocked.
1. Turn off the water tap.
2. Unscrew the water inlet hose.
3. Clean the filter in the hose using a hard
bristle brush.
4. Screw the hose back onto the tap.
5. Unscrew the hose from the machine.
Keep a rug nearby because some wa-
ter may flow.
6. Clean the filter in the valve with a stiff
brush or with the piece of cloth.
7. Screw the hose back to the machine
and make sure the connection is tight.
8. Turn on the water tap.
Frost precautions
If the machine is installed in a place where
the temperature could drop below 0°C,
proceed as follows:
1. Turn off the water tap.
2. Unscrew the inlet hose.
3. Place the end of the emergency empty-
ing hose and that of the inlet hose in a
bowl placed on the floor and let water
drain out.
4. Screw the water inlet hose back on and
reposition the emergency emptying
hose after having put the cap on again.
18 electrolux