Electrolux EWF7525DQWA, Руководство пользователя

Страница: 14 / 36

14 www.electrolux.com
BEFORE FIRST USE 4.
Ensure that the electrical and water
connections comply with the
installation instructions.
Put 2 litres of water in the detergent
compartment for washing phase.
This activates the drain system.
1.
2.
3. Select a Cottons cycle at 90 °C,
without any laundry in the machine,
to remove any manufacturing
residue from the drum and tub then
start the machine.
During installation or before first use
you may observe some water in the
machine. This is a residual water left in
the machine after a full functional test
in the factory to ensure the machine is
delivered to customers in perfect
working order and is no cause for
concern.
NOTE
Start/Pause ( ), Pause to add clothes ( )
This touchpad has 2 functions:
Start/Pause ( )
To interrupt a program which is
running, press this touchpad to pause
the machine, the “Start/Pause” pilot
light flashes.
After you have selected the desired
program and options, press this
touchpad to start the machine. The
“Start/Pause” pilot light will stop
flashing and remain lit until the water
level is above the bottom edge of the
door then pilot light goes OFF. If you
have selected a “Delay End” option,
the countdown will begin and will be
shown in the display.
To restart the program from the point
at which it was interrupted, press this
touchpad again, the “Start/Pause”
pilot light will stop flashing.
Pause to add clothes ( )
While running a program, you may add
clothes by:
Pressing the “ ” touchpad to pause
the program.
You can only add clothes if add
clothes “ ” pilot light is lit.
-
Wait for the machine to come to a
complete stop before opening the door.
-
Resume the program by pressing “ ”
touchpad again.
-
Add clothing and close the door.
-
3.7
You cannot open the door if the
water inside the machine drum
are hot, the door remains locked
for your safety. Although the LED
light still remain lit.