19
10. Start the programme
Press the Start/Add clothes button. The light will stop
flashing. The message relevant to the phase that is
in progress will be shown in the display.
If you have chosen a delayed start, the washing
machine will begin the countdown.
11. How to change a programme
during its cycle
First push the Start/Add clothes button to pause the
current cycle, then move the dial to the off position.
If there is water still in the tub, then it must be
drained by moving the dial to the "Drain" programme
and push Start/Add clothes to commence draining.
After draining cycle is complete, move the selector
dial to Off, then to the desired program (add
detergent if required) and push Start/Add clothes to
again begin the programme.
12. Cancelling a programme
Turn the selector dial to «
Off
» to cancel a
programme which is running. Now you can select a
new programme.
13.How to open the door during
the cycle of a programme
You can open the door, after having set the washing
machine to PAUSE, by pressing Start/Add clothes
button provided the following conditions exist:
1) the washing machine is not in the heating phase
beyond 55°C
2) the level of the water is not high;
3) the drum is not turning.
Change
Options
Exit
COTTON
Washing
08.30
12.00
40°C 1200
Temp.
Spin
If these requirements are met, when you pause the
washing machine, the relevant message appears in
the display, the door locked light goes out and the
door can be opened.
Should it not be possible to open the door and the
door locked light is on, should it be absolutely
necessary to do so, switch the machine off by turning
the selector dial on "Off" position.
After approximately 3 minutes, you can open the
door.
Pay attention to the level and temperature of the
water in the washing machine!
14. End of programme
At the end of the programme, the washing machine
stops automatically, gives an audible signal (if option
no sound has not been selected), and displays the
relevant message.
If you had selected the RINSE HOLD or NIGHT
CYCLE option, the Start/Add clothes button light is
off and the door locked light is on.
To drain or spin first turn the programme selector dial
to «
Off
» and then to drain programme or
spin/delicate spin programme.
Release of the lock is also indicated by the coming
on of the message "Door openable" (cycle ended)
and the going out of the door locked light.
Turn the programme selector dial to «
Off
» to switch
the machine off.
Remove the laundry from the washing machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get
damaged in a subsequent wash (e.g. by shrinking) or
bleed colour into another load of laundry.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Leave the door ajar in order to air the washing
machine.
usermanual 1495 au_5.qxp 11/6/2006 5:53 PM Page 19
