23
Contrast and brightness
1.
Turn the program knob to any program and press the OPTION key repeat-
edly until the SETUP symbol
flashes.
2.
Press the OK key.
3.
Press the OPTION key repeatedly, until the display shows CONTRAST or
or BRIGHTNESS.
4.
Press the OK key.
5.
Using the OPTION key set the
desired setting. With each press
of the key or if the key is kept
pressed down, the black trian-
gle in the diagram moves further
to the right for more contrast or
brightness. If the triangle reach-
es the right hand edge, it starts again from the left.
6.
Press the OK key. The display changes to the next special function or
back to the exit icon.
7.
Press the OPTION key repeatedly, until the exit icon appears.
Child safety device
When the child safety device is set, the door can no longer be closed.
Setting the child safety device:
Use a coin to turn the knob (on the inside
of the door) in a clockwise direction as
far as it will go.
1
Warning!
The knob must not be sunk-in
after being set, otherwise the child safety
device is not active. The knob must
stand out as shown in the illustration.
Releasing the child safety device:
Turn the knob anti-clockwise as far as it
will go.
C o n t r a s t
ƒ … … … … … … ™ … … … … … … ‡
aýýýýýaýaýaýaýBýaýaýaýa
TEMP. C°
TEMP. C°
U/MIN.
T/MIN.
OPTION
OPTIONS
OK
OK
ZEIT
TEMPS
