Electrolux EWF10841, Руководство пользователя

Страница: 30 / 35

Cover all the
open holes with
the plugs which
you can find in
the bag
containing the
instruction
booklet.
Remove the polystyrene base, set the
machine upright and unscrew the
remaining
rear screw.
Slide out the
relevant pin.
Unpacking
All transit bolts and packing must
be removed before using the
appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
Using a
spanner
unscrew and
remove the
two rear
bottom
screws.
Slide out the
two plastic
pins.
Lay the machine on its back ensuring
that the hoses are not crushed.
Place one of
the polystyrene
angle packings
under the
machine.
Some models are provided with a
bottom cover that will be found inside
the washing
machine drum.
After ensuring
the polyethylene
bags have been
removed, follow
below
instruction:
Locate the bottom cover as
shown in position (A). (1).
1.
4.
5.
6.
2.
3.
Then push the top end to lock to
the bottom of washing machine. (2).
A
1
2
2