Electrolux EWF 148315 W, Руководство пользователя

Страница: 11 / 28

gramme and before starting the pro-
gramme. When these buttons are pressed,
the corresponding pilot lights illuminate.
When they are pressed again, the pilot
lights go out. If an incorrect option is selec-
ted, the integrated
red pilot light of the but-
ton 6 flashes for 3 times.
For the compatibility among the wash-
ing programmes and the options see
chapter «Washing Programmes».
SELECT THE DELAY START BY
PRESSING BUTTON 7
Before you start the programme, if you wish
to delay the start, press the button
7 re-
peatedly, to set the desired delay. The set
delay time value (up to 20 hours) will appear
on the display a few seconds, then the du-
ration of the programme will appear again.
You must select this option after you have
set the programme and before you press
button
6 .
You can cancel or modify the delay time at
any moment, before you press button
6 .
Selecting the delayed start:
1. Set the programme and the required
options.
2. Press button 7 to set the delay start .
3. Press button 6 :
– the machine starts its hourly count-
down.
– The programme will start after the
selected delay has expired.
Cancelling the delayed start after having
pressed button
6 :
1. Press button 6 to set the washing ma-
chine to PAUSE.
2. Press button
7 once until the value ’
is displayed
3. Press button 6 again to start the pro-
gramme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start
can not be selected with
the DRAIN programme.
START THE PROGRAMME BY
PRESSING BUTTON 6
To start the selected programme, press the
button
6 , the corresponding green pilot light
stops blinking. The pilot lights 8.1 and 8.2
illuminate to indicate that the appliance
starts operating and the door is locked.
To interrupt a programme which is running,
press the button
6 : the corresponding
green pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button
6
again . If you have chosen a delayed start,
the machine will begin the countdown.
If an incorrect option is selected, the
red pi-
lot light of the button 6 blinks for 3 times
the message Err is displayed for a few sec-
onds.
ALTERING AN OPTION OR A RUNNING
PROGRAMME
It is possible to change some options be-
fore the programme carries them out.
Before you make any change, you must
PAUSE the appliance by pressing the but-
ton
6 .
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to
and then to the new pro-
gramme position. Start the new programme
by pressing the button
6 again. The wash-
ing water in the tub will be not emptied out.
INTERRUPTING A PROGRAMME
Press the button 6 to interrupt a pro-
gramme which is running, the correspond-
ing green pilot light starts blinking.
Press the button again to
restart the pro-
gramme.
CANCELLING A PROGRAMME
Turn the selector dial to to cancel a pro-
gramme which is running.
You can select now a new programme.
OPENING THE DOOR
After the programme has started (or during
the delay time) the door is locked. If you
need to open the door, press first the but-
ton
6 to set the machine to PAUSE. After a
few minutes the light 8.2 goes out. It is pos-
sible to open the door.
If this light remains lit and the door is
locked, this means that the machine is al-
ready heating or that the water level is too
electrolux 11