Cancelling the delayed start after having
pressed button
8
:
1. Set the washing machine to PAUSE by
pressing button
8
.
2. Press button
7
once until the symbol
’
is displayed
3. Press button
8
again to start the pro-
gramme.
Important!
The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start
can not
be selected with
DRAIN
programme.
Start the programme by pressing button
8
To start the selected programme, press the
button
8
, the green pilot light of the button
8
stops blinking. The icon
2.8
appears on the
display to indicate that the appliance starts
operating and the door is locked.
To interrupt a programme which is running,
press the button
8
: the green pilot light starts
to blink.
To restart the programme from the point at
which it was interrupted, press the button
8
again
. If you have chosen a delayed start,
the machine will begin the countdown.
If an incorrect option is selected, the
red
pilot
light of the button
8
blinks for 3 times the
message
Err
is displayed for few seconds.
Select the Time Manager option by
pressing buttons 9
By pressing these buttons repeatedly, the
duration of the washing cycle can be in-
creased or decreased. The icon
2.10
will
appear on the display to indicate the chosen
degree of soil. This option is available only
with
Cotton
,
Synthetic
and
Delicate
pro-
grammes.
Soil Level
Icon
Type of fabric
Intensive
For heavy soiled
items
Normal
For normal soiled
items
Daily
For daily soiled items
Light
For slightly soiled
items
Quick
For very slightly
soiled items
Soil Level
Icon
Type of fabric
Super Quick
1)
For items used or
worn for a short time
Refresh
1)
2)
For refreshing items
only
Super Refresh
1)
2)
For refreshing a very
few items only
1) We recommend you to reduce the load sizes (see
Washing programmes table).
2) When you select this option the relevant icon appears
just for a while and then it disappears immediately.
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out .
Before you make any change, you must
PAUSE the appliance by pressing the button
8
(if you wish to change the Time Manager
option, you must cancel the running pro-
gramme and make your selection again).
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to
and then to the new pro-
gramme position. Start the new programme
by pressing the button
8
again. The washing
water in the tub will be not emptied out.
Interrupting a programme
Press the button
8
to interrupt a programme
which is running, the corresponding green
pilot light starts blinking.
Press the button again to
restart
the pro-
gramme.
Cancelling a programme
Turn the selector dial to
to cancel a pro-
gramme which is running.
You can select now a new programme.
Opening the door
After the programme has started (or during
the delay time) the door is locked, if you need
to open it, set first the machine to PAUSE by
pressing the button
8
.
If the icon
2.8
disappears after some mi-
nutes, the door can be opened.
If the icon
2.8
does not go off, this means that
the machine is already heating or that the
water level is too high. Do not try to force the
door!
If you cannot open the door but you need to
open it you have to switch the machine off by
turning the selector dial to
. After a few
10
electrolux
