Electrolux EWF 14680W, Руководство пользователя

Страница: 29 / 35

electrolux 29
IMPORTANT: The distance from the
floor to the highest part of the hose
should be between 60 to 90 cm. (It is
advised to be between 60 and 70 cm).
The hose must not be bent nor twisted
to avoid clogging. Should a prolonga-
tion of the discharging hose be
unavoidable this must never surpass
1.5 m and must be of the same diame-
ter as the original hose. Make sure the
hoses are not too tense.
Levelling
Level the washing machine by loosening
or tightening the feet. Once in the right
position fix the feet by pushing the nuts
against the base of the case. Accurate
levelling will prevent vibration, noise and
displacement of the appliance during
operation.
Some vibration is inevitable, especially if
placed on a wooden floor. Wooden
floors are particularly susceptible to
vibrations, if possible always place the
appliance on a solid floor.
Electrical connection
This machine is designed to operate
on a 230 v, single-phase, 50Hz supply.
Check that your domestic electricla
installation can take the maximum load
required (2.1 kW), also taking into
account any other appliances in use.
The applicable rules for electrical
security require an adequate earth-
ing. The plug of the appliance is
provided with such a device.
The manufacturer declines any respons-
ability for damage or injury through failure
to comply with the above safety precau-
tion. Should the appliance power supply
cable need to be a replaced, this should
be carried out by our Service Centre.
Please ensure that when the appliance is
installed the power supply cble is easily
accessible.
126.2931.14…EWF12680-14680W.qxd 28/10/08 13:39 Página 29