Electrolux EWF 146410 A, Руководство пользователя

Страница: 13 / 20

Clean the pump if:
• The appliance does not drain the water.
• The drum cannot turn.
• The appliance makes an unusual noise
because of the blockage of the drain
pump.
Warning!
1. Disconnect the mains plug from
the mains socket.
2. Do not remove the filter while the
appliance operates. Do not clean
the drain pump if the water in the
appliance is hot. The water must
be cold before you clean the drain
pump.
1. Open the pump door.
2. Put a container below the recess of the
drain pump to collect the water that
flows out.
3. Unscrew the filter to let the water flow
out.
4. When the container is full of water,
screw the filter again and empty the
container. Do steps 3 and 4 again and
again until no more water flows out
from the drain pump.
5. Unscrew the filter and remove it.
1
2
6. Remove fluff and objects from the
pump.
7. Make sure that the impeller of the
pump can turn. If this does not occur,
contact the service centre.
8. Clean the filter under the water tap and
put it back in the pump.
9. Make sure that you tighten correctly the
filter to prevent leakages.
1
2
10. Close the drain pump door.
CLEAN THE INLET VALVE FILTER
It could be necessary to clean the filter
when:
electrolux 13