104
ENGLISH
Problems which you can resolve yourself, before calling the After Sales Service.
During machine operation it is possible that one of the following messages appears on the display:
Problem with the water supply ......“No incoming water. Check tap & hose”
Problem with water draining ..........“No drain. Check drain hose/filter”
Door open ......................................“Door not closed. Please check”
Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all
checks, the problem persists, contact your local Service Centre.
Problem
Possible cause
• The machine does not start up:
• The door is not firmly closed. (Door not closed.
Please check)
• The machine is not plugged in or there is no power
at the socket.
• The main fuse has blown.
• The programme selector dial is not positioned correctly
and the START/PAUSE button has not been
depressed.
• The Delay Start has been selected.
• The machine does not fill:
• The water tap is closed. (No incoming water.
Check tap & hose)
• The inlet hose is squashed or kinked. (No
incoming water. Check tap & hose)
• The filter in the inlet hose is blocked. (No
incoming water. Check tap & hose)
• The door is not properly closed. (Door not
closed. Please check)
• The machine fills then empties
immediately:
• The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage” section.
• The machine does not empty
and/or does not spin:
• The drain hose is squashed or kinked. (No drain.
Check drain hose/filter)
• A programme which ends with water in tub
(option
or
) has been selected.
• The option no spin “0” has been selected.
• The drain pump is clogged. (No drain. Check
drain hose/filter)
• There is water on the floor:
• Too much detergent or unsuitable detergent
(creates too much foam) has been used.
• Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
• The drain hose is damaged.
• The cap on the emergency emptying hose has not
been replaced after cleaning the pump.
• Unsatisfactory washing results:
• Too little or too much detergent has been used.
• An unsuitable detergent has been used.
• Stubborn stains have not been treated prior to
washing.
• The correct temperature was not selected.
• Excessive laundry load.
Something not working?
132986250GB.qxd 09/02/2005 12:28 Pagina 104 (Nero/Process Black pellicola)