Electrolux EWF 14380 W, Руководство пользователя

Страница: 9 / 28

Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button
6 will blink 3 times
and the message Err is displayed on the
display to indicate a wrong selection.
The machine will not perform the new
selected programme.
Reduce the spin speed by pressing
button 2
When the required programme has been se-
lected, your appliance automatically propo-
ses the maximum spin speed provided for
that programme.
Press button
2 repeatedly to change the spin
speed, if you want your laundry to be spun at
a speed different from the one proposed by
the washing machine. The relevant light will
light up.
Select the available options by pressing
buttons 2, 3 and 4
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before starting the programme.
When these buttons are pressed, the corre-
sponding pilot lights illuminate. When they
are pressed again, the pilot lights go out. If
an incorrect option is selected, the integrated
red pilot light of the button 6 flashes for 3
times.
For the compatibility among the washing
programmes and the options see chap-
ter «Washing Programmes».
Select the Delay Start by pressing
button 7
Before you start the programme, if you wish
to delay the start, press the button
7 repeat-
edly, to select the desired delay. The relevant
pilot light goes on.
The selected delay time value (up to 20
hours) will appear on the display a few sec-
onds, then the duration of the programme
will appear again.
You must select this option after you have set
the programme and before you press button
6 .
You can cancel or modify the delay time at
any moment, before you press button
6 .
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the but-
ton 7 .
3. Press button 6 :
– the machine starts its hourly count-
down.
– The programme will start after the se-
lected delay has expired.
Cancelling the delayed start after having
pressed button
6 :
1. Set the washing machine to PAUSE by
pressing button 6 .
2. Press button 6 once until the symbol 0’ is
displayed
3. Press button 8 again to start the pro-
gramme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start
can not be selected with
DRAIN programme.
Start the programme by pressing button
6
To start the selected programme, press the
button
6 , the corresponding green pilot light
stops blinking. The pilot lights 8.1 and 8.2
illuminate to indicate that the appliance starts
operating and the door is locked.
To interrupt a programme which is running,
press the button
6 : the corresponding green
pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button
6
again . If you have chosen a delayed start,
the machine will begin the countdown.
If an incorrect option is selected, the
red pilot
light of the button 6 blinks for 3 times the
message Err is displayed for a few seconds.
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out.
Before you make any change, you must
PAUSE the appliance by pressing the button
6 .
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to
O and then to the new pro-
gramme position. Start the new programme
by pressing the button
6 again. The washing
water in the tub will be not emptied out.
electrolux 9