Electrolux EWF 14260, Руководство пользователя

Страница: 14 / 42

14 electrolux use
The programme will start after the
selected delay has expired.
Cancelling the delayed start
• Depress “Start/Pause” button.
• Depress “Start/Pause” button more
times until the symbol
0’
is displayed.
• Depress “Start/Pause” button again.
The Delay Start can not be selected
with
Drain programme.
Programme progress display
After having pressed the Start/Pause
button, the
“wash” pilot lights
comes on.
When the pilot light “wash” comes on
this means that the machine is
performing the washing cycle.
The “door” pilot light indicates if
the door can be opened:
• light on: the door cannot be opened.
The appliance is running.
• light off: the door can be opened.
The washing programme is finished.
When the programme has finished, the
“End” pilot light comes on.
Altering an option or a running
programme
It is possible to change any option
before the programme carries it out.
Before you make any change, you must
pause the washing machine by pressing
the
“Start/Pause” button.
Changing a running programme is
possible
only by resetting it . Turn the
programme selector dial to “O” and
then to the new programme position.
The washing water in the tub will not
emptied out. Start the new programme
by depressing the
“Start/Pause” button
again.
Interrupting a programme
Depress the “Start/Pause” button to
interrupt a programme which is running,
the corresponding light starts to flash.
Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to “O” to cancel
a programme which is running. Now
you can select a new programme.
Opening the door after the
programme has started
First set the machine to pause by
pressing the
“Start/Pause” button.
If the “door” light does not switch
off, this means that the machine is
already heating, that the water level is
above the bottom edge of the door or
that the drum is turning.
In this case the door can not be
opened.
If you cannot open the door but you
need to open it you have to switch the
machine off by turning the selector dial
to
“O” . After about 3 minutes the door
can be opened (pay attention to the
water level and temperature!) .
132980730.qxd 19/09/2007 11.53 Pagina 14